IGEO00MDA Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : MOLDPOS GNSS team ([email protected])
Date Prepared : 2024-11-26
Report Type : UPDATE
If Update:
Previous Site Log : igeo00mda_20241125.log
Modified/Added Sections : 3.9, 3.10
1. Site Identification of the GNSS Monument
Site Name : IGEO
Nine Character ID : IGEO00MDA
Monument Inscription : IGEO 01
IERS DOMES Number : 15101M001
CDP Number : (A4)
Monument Description : Concrete Pillar coated with brick
Height of the Monument : 1.9 m
Monument Foundation : Concrete pillar
Foundation Depth : 5 m
Marker Description : Brass reference marker
Date Installed : 2006-11-10T12:50Z
Geologic Characteristic : SOLID
Bedrock Type : SEDIMENTARY
Bedrock Condition : WEATHERED
Fracture Spacing : 0 cm
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : Concrete pillar fastened on the building roof
: with reinforcement bas assembly.
: The monument height is considered from the
: roof to the top of the brass threaded bolt.
: The marker is 23.6 m above the ground.
: Brass reference marker, rotating adapter with
: 5/8x11 threaded bolt.
2. Site Location Information
City or Town : Chisinau
State or Province : Chisinau
Country or Region : MDA
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3814971.800
Y coordinate (m) : 2101073.500
Z coordinate (m) : 4644140.700
Latitude (N is +) : +470149.34
Longitude (E is +) : +0285036.67
Elevation (m,ellips.) : 100.8
Additional Information : The ellipsoidal elevation is calculated using
: normal height and height anomaly with 0.1 m
: accuracy.
3. GNSS Receiver Information
3.1 Receiver Type : ASHTECH Z-XII3
Satellite System : GPS
Serial Number : LP03171
Firmware Version : 1K00-1D04
Elevation Cutoff Setting : 0 deg
Date Installed : 2007-07-03T11:00Z
Date Removed : 2017-08-30
Temperature Stabiliz. : 23.0 +/- (deg C)
Additional Information : Bundesamt fuer Kartographie und Geodaesie,
: Germany made available this receiver.
3.2 Receiver Type : LEICA GR10
Satellite System : GPS+GLO
Serial Number : 1700697
Firmware Version : 4.02/6.522
Elevation Cutoff Setting : 5 deg
Date Installed : 2017-08-30
Date Removed : 2018-08-01
Temperature Stabiliz. : 20.1 +/- 0.4
Additional Information : (multiple lines)
3.3 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.11/6.522
Elevation Cutoff Setting : 5 deg
Date Installed : 2018-08-02
Date Removed : 2018-08-06
Temperature Stabiliz. : (deg C) +/- 0.4
Additional Information : (multiple lines)
3.4 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.20/6.523
Elevation Cutoff Setting : 5 deg
Date Installed : 2018-08-06
Date Removed : 2018-08-07
Temperature Stabiliz. : (deg C) +/- 0.4
Additional Information : (multiple lines)
3.5 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.20/6.524
Elevation Cutoff Setting : 5 deg
Date Installed : 2018-08-07
Date Removed : 2018-09-04
Temperature Stabiliz. : (deg C) +/- 0.4
Additional Information : (multiple lines)
3.6 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.31/6.525
Elevation Cutoff Setting : 5 deg
Date Installed : 2018-09-05
Date Removed : 2018-12-15
Temperature Stabiliz. : (deg C) +/- 0.4
Additional Information : (multiple lines)
3.7 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.31/6.525
Elevation Cutoff Setting : 0 deg
Date Installed : 2018-12-16
Date Removed : 2022-12-26
Temperature Stabiliz. : (deg C) +/- 0.4
Additional Information : (multiple lines)
3.8 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.31/6.525
Elevation Cutoff Setting : 5 deg
Date Installed : 2022-12-27
Date Removed : 2023-01-12
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.9 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.31/6.525
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-01-13
Date Removed : 2024-11-20
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.10 Receiver Type : LEICA GR10
Satellite System : GPS+GLO+GAL
Serial Number : 1700697
Firmware Version : 4.60/6.525
Elevation Cutoff Setting : 0 deg
Date Installed : 2024-11-20
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : ASH700936D_M SNOW
Serial Number : CR13726
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : -0.0136
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : RG 214
Antenna Cable Length : 30 m
Date Installed : 2007-07-03T11:00Z
Date Removed : 2017-08-30T10:00Z
Additional Information : Bundesamt fuer Kartographie und Geodaesie,
: Germany made available this antenna.
4.2 Antenna Type : LEIAR10 NONE
Serial Number : 13167012
Antenna Reference Point : BAM
Marker->ARP Up Ecc. (m) : -0.0136
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : NONE
Radome Serial Number :
Antenna Cable Type : GEV134
Antenna Cable Length : 30 m
Date Installed : 2017-08-30T10:10Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : (multiple lines)
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2007-07-03/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : State Enterprise Institute of Geodesy,
: Engineering Ressearch and Cadastre
Preferred Abbreviation : INGEOCAD
Mailing Address : Lazo S. 48
: MD-2004 Chisinau
: Moldova (the Republic of)
Primary Contact
Contact Name : MOLDPOS GNSS team
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail : [email protected]
Secondary Contact
Contact Name : Alexandru Mihailov
Telephone (primary) : +373 22 881 214
Telephone (secondary) :
Fax : +373 22 881 220
E-mail : [email protected]
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BEV
URL for More Information : www.ingeocad.md
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : Y
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
LEIAR10
<-- 0.2400 -->
. ^ . <--0.1362
. .
. .
. .
. .
. .
. .
/ \
| |
| |<--0.0362 Notch
+-----....___ ___....-----+
'*-.__ +-+-+ __.-\ \ <--0.0136 IGEO Marker
| | | | \/
+--+=|-x-|=+--+ <--0.0000 BAM=ARP
Brass base=>| | NOM=NRP
| |
+----------------------+====|===|====+----------------------+
| | | |<=Granite plate
+---------------------------|---|---------------------------+
| |
| Concrete pillar |
| |
|<-- 0.5000 -->|
ARP: Antenna Reference Point
BAM: Bottom of Antenna Mount
NRP: North Reference Point
NOM: North Orientation Mark
All dimensions are in meters.
