CAGZ00ITA Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : University of Cagliari DICAAR GNSS
Date Prepared : 2022-05-06
Report Type : UPDATE
If Update:
Previous Site Log : cagz00ita_20220505.log
Modified/Added Sections : 11, 12
1. Site Identification of the GNSS Monument
Site Name : Cagliari
Nine Character ID : CAGZ00ITA
Monument Inscription :
IERS DOMES Number : 12725M004
CDP Number : (A4)
Monument Description : stable pillar on the ground
Height of the Monument : 1.5 m
Monument Foundation : CONCRETE BLOCK WITH STEEL RODS
Foundation Depth : 0.5 m
Marker Description : BRASS FORCE FIT
Date Installed : 1995-02-01
Geologic Characteristic : BEDROCK
Bedrock Type : IGNEOUS
Bedrock Condition : JOINTED
Fracture Spacing : 0 cm
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : Exact date in Feb 1995 not known
2. Site Location Information
City or Town : Capoterra
State or Province : Sardinia
Country or Region : ITA
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 4893380.225
Y coordinate (m) : 772650.197
Z coordinate (m) : 4004179.763
Latitude (N is +) : +390809.19
Longitude (E is +) : +0085821.92
Elevation (m,ellips.) : 238.0
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : JPS EUROCARD
Satellite System : GPS+GLO
Serial Number : LE2998
Firmware Version : MT310305520
Elevation Cutoff Setting : 5 deg
Date Installed : 2001-10-01
Date Removed : 2003-08-11
Temperature Stabiliz. : 20.0 +/- 2.0
Additional Information : Exact date in October not known
3.2 Receiver Type : JPS E_GGD
Satellite System : GPS+GLO
Serial Number : LE4687
Firmware Version : AGNV7TGA2O0
Elevation Cutoff Setting : 5 deg
Date Installed : 2003-08-11
Date Removed : 2004-04-08
Temperature Stabiliz. : 20.0 +/- 2.0
Additional Information : Spare receiver until repair of 3.1
3.3 Receiver Type : JPS E_GGD
Satellite System : GPS+GLO
Serial Number : 235-1757
Firmware Version : AE82EUA01KW
Elevation Cutoff Setting : 5 deg
Date Installed : 2004-04-08
Date Removed : 2004-05-08T10:30Z
Temperature Stabiliz. : 20.0 +/- 2.0
Additional Information : Spare receiver until repair of 3.1
3.4 Receiver Type : JPS EUROCARD
Satellite System : GPS+GLO
Serial Number : LE2998
Firmware Version : MT310305520
Elevation Cutoff Setting : 5 deg
Date Installed : 2004-05-17T11:00Z
Date Removed : 2004-07-26T13:30Z
Temperature Stabiliz. : 20.0 +/- 2.0
Additional Information : re-installing of the receiver 3.1
3.5 Receiver Type : JPS E_GGD
Satellite System : GPS+GLO
Serial Number : 235-2098
Firmware Version : AE6A2FQG160
Elevation Cutoff Setting : 5 deg
Date Installed : 2004-07-26T14:30Z
Date Removed : 2004-12-01T12:00Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : Spare receiver until repair of 3.4
3.6 Receiver Type : JPS E_GGD
Satellite System : GPS+GLO
Serial Number : LE4687
Firmware Version : AGNV7TGA2O0
Elevation Cutoff Setting : 5 deg
Date Installed : 2004-12-01T14:00Z
Date Removed : 2007-11-07T15:00Z
Temperature Stabiliz. : 20.0 +/- 3.0
Additional Information : receiver 3.2
: Case label: TOPCON LEGACY-E
3.7 Receiver Type : TPS E_GGD
Satellite System : GPS+GLO
Serial Number : AGNV7TGA2O0
Firmware Version : 2.4 Sep,02,2004
Elevation Cutoff Setting : 5 deg
Date Installed : 2007-11-07T15:00Z
Date Removed : 2007-11-15T12:36Z
Temperature Stabiliz. : 20.0 +/- 3.0
Additional Information : receiver 3.2
: Case label: TOPCON LEGACY-E
3.8 Receiver Type : TPS E_GGD
Satellite System : GPS+GLO
Serial Number : AGNV7TGA2O0
Firmware Version : 2.6 Mar,16,2006
Elevation Cutoff Setting : 5 deg
Date Installed : 2007-11-15T12:36Z
Date Removed : 2007-11-30T12:00Z
Temperature Stabiliz. : 20.0 +/- 3.0
Additional Information : receiver 3.2
: Case label: TOPCON LEGACY-E
3.9 Receiver Type : TPS E_GGD
Satellite System : GPS+GLO
Serial Number : AGNV7TGA2O0
Firmware Version : 3.1 Mar,13,2007 p2
Elevation Cutoff Setting : 5 deg
Date Installed : 2007-11-30T12:00Z
Date Removed : 2008-11-20T15:20Z
Temperature Stabiliz. : 20.0 +/- 3.0
Additional Information : receiver 3.2
: Case label: TOPCON LEGACY-E
3.10 Receiver Type : TPS E_GGD
Satellite System : GPS+GLO
Serial Number : AGNV7TGA2O0
Firmware Version : 3.3 Jul,10,2008 p4
Elevation Cutoff Setting : 5 deg
Date Installed : 2008-11-20T21:37Z
Date Removed : 2013-09-22
Temperature Stabiliz. : 20.0 +/- 3.0
Additional Information : receiver 3.2
: Case label: TOPCON LEGACY-E
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : JPSREGANT_DD_E2 NONE
Serial Number : RRA052
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0945
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : NONE
Radome Serial Number :
Antenna Cable Type : RG214
Antenna Cable Length : 30 m
Date Installed : 2001-10-01
Date Removed : 2013-09-22
Additional Information : Exact date in October not known.
: The former valuation
: Marker->ARP Up Ecc. = 0.1095
: was wrong (ARP misundertood).
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.1 Tied Marker Name : SLR, marker O
Tied Marker Usage : MOBILE SLR
Tied Marker CDP Number : 7545
Tied Marker DOMES Number : 12725M002
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : 17.891 m
dy (m) : 23.152 m
dz (m) : -38.814 m
Accuracy (mm) : 10 mm
Survey method : GPS CAMPAIGN
Date Measured : 2003-05-12
Additional Information : (multiple lines)
5.2 Tied Marker Name : CAGL
Tied Marker Usage : EPN permanent station
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : 12725M003
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : -1.146 m
dy (m) : -0.691 m
dz (m) : 2.137 m
Accuracy (mm) : 5 mm
Survey method : GPS CAMPAIGN
Date Measured : 2003-05-12
Additional Information : Responsible agency ASI
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : EXTERNAL CAESIUM OSCILLATOR
Input Frequency : 10 MHz
Effective Dates : 2004-12-01/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.1 Instrumentation Type : SLR
Status : MOBILE
Effective Dates : 1985-05-12/1993-12-15
Notes : MTLRS, TLRS1
7.2 Instrumentation Type : SLR
Status : PERMANENT
Effective Dates : 1993-12-01/2002-11-01
Notes : (multiple lines)
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : HMP 35D
Manufacturer : VAISALA
Serial Number :
Data Sampling Interval : 60 sec
Accuracy (% rel h) : 3 % rel h
Aspiration : NATURAL
Height Diff to Ant : 0.416 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2005-02-15/CCYY-MM-DD
Notes : (multiple lines)
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : PTB 100
Manufacturer : VAISALA
Serial Number :
Data Sampling Interval : 30 sec
Accuracy : 1 hPa
Height Diff to Ant : 0 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2005-02-15/CCYY-MM-DD
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : HMP 35D
Manufacturer : VAISALA
Serial Number :
Data Sampling Interval : 60 sec
Accuracy : 0.1 deg C
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : 0.416 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2005-02-15/CCYY-MM-DD
Notes : (multiple lines)
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : University of Cagliari
: Department of Civil and Environmental
: Engineering and Architecture
Preferred Abbreviation : DICAAR
Mailing Address : Via Marengo 2
: 09123 Cagliari
: Italy
Primary Contact
Contact Name : University of Cagliari DICAAR GNSS
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail : [email protected]
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : ASI
URL for More Information : http://topografia.unica.it
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : http://www.ca.astro.it
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
JPSREGANT_DD_E
+------------------------+ <---------- Plastic Housing for
/ ------------------ \ Antenna/Choke Ring
/ / + \ \ <-- 0.1186 L2
+---------+ | + | +---------+ <-- 0.1131 L1
| +-------------------------------------------------+ | <-- 0.xxxx TCR
/ | | \
\+-----------------------------------------------------+/
|+-----------------------------------------------------+| <-- 0.xxxx BCR
\______________ | | ______________/
