ASGA00CYP Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : CUT Geodesy Lab ([email protected])
Date Prepared : 2024-08-27
Report Type : UPDATE
If Update:
Previous Site Log : asga00cyp_20240216.log
Modified/Added Sections : 3.6, 3.7
1. Site Identification of the GNSS Monument
Site Name : ASGATA
Nine Character ID : ASGA00CYP
Monument Inscription :
IERS DOMES Number : 25401M001
CDP Number : (A4)
Monument Description : SHALLOW DRILLED BRACED QUADPOD
Height of the Monument : 0 m
Monument Foundation : STEEL RODS
Foundation Depth : 2 m
Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc)
Date Installed : 2021-07-27T08:00Z
Geologic Characteristic : BEDROCK
Bedrock Type : IGNEOUS
Bedrock Condition : JOINTED
Fracture Spacing : 1-10 cm
Fault zones nearby : YES
Distance/activity : Fault zone distance: 1000m
Additional Information : (multiple lines)
2. Site Location Information
City or Town : Asgata
State or Province : Limassol
Country or Region : CYP
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 4385721.009
Y coordinate (m) : 2875270.052
Z coordinate (m) : 3618529.240
Latitude (N is +) : +344709.48
Longitude (E is +) : +0331455.57
Elevation (m,ellips.) : 242.3
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 5.44
Elevation Cutoff Setting : 0 deg
Date Installed : 2021-07-27T08:00Z
Date Removed : 2021-09-15
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.2 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.12
Elevation Cutoff Setting : 0 deg
Date Installed : 2021-09-15
Date Removed : 2022-07-07
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.3 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.14
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-07-07
Date Removed : 2022-11-10
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.4 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.15
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-11-10
Date Removed : 2023-01-21
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.5 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.16
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-01-21
Date Removed : 2023-09-11
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.6 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.21
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-09-11
Date Removed : 2024-08-27
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.7 Receiver Type : TRIMBLE ALLOY
Satellite System : GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS
Serial Number : 6107R40097
Firmware Version : 6.23
Elevation Cutoff Setting : 0 deg
Date Installed : 2024-08-27
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : TRM159900.00 SCIS
Serial Number : 5051338475
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0000
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SCIS
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : 2021-07-27T08:00Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : (multiple lines)
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2021-07-27/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Cyprus University of Technology
: Faculty of Engineering and Technology
: Department of Civil Engineering and Geomatics
: Laboratory of Geodesy
Preferred Abbreviation : CUT
Mailing Address : Saripolou Street 2-8 / Achilleos 1 Building
: 3036 Limassol
: Cyprus
Primary Contact
Contact Name : CUT Geodesy Lab
Telephone (primary) : +357 25 002352
Telephone (secondary) :
Fax :
E-mail : [email protected]
Secondary Contact
Contact Name : Dr. Chris Danezis
Telephone (primary) : +357 25 002352
Telephone (secondary) :
Fax : +357 25 002769
E-mail : [email protected]
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BEV
URL for More Information :
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : (Y or URL)
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
